Upper Transmission Mount Removal and Installation
3. Harness Clamp - Remove
1.
Remove the harness clamps (A).

4. PCM with Bracket - Remove
1.
Remove the PCM (A) with the bracket (B).

6. Transmission - Support
1.
Lift and support the engine with a jack and a wood block under the transmission.

7. Upper Transmission Mount - Remove

M/T

CVT
1.
Remove the ground cable (A).
2.
Remove the upper transmission mount bracket mounting bolts (B) and the upper transmission mount mounting bolts (C).
NOTE: Do not remove the bolt (D) from the upper transmission mount. If the bolt is removed, the upper transmission mount must be replaced as an assembly.
3.
Remove the upper transmission mount.

1. Upper Transmission Mount - Install

M/T

CVT
1.
Install the upper transmission mount.
2.
Tighten the new upper transmission mount mounting bolts (A).
3.
Loosely install the new upper transmission mount bracket mounting bolts (B).
4.
Install the ground cable (C).

2. Jack and Wood Block - Remove


3. Upper Transmission Mount Bracket Mounting Bolt - Tighten

M/T

CVT

4. PCM with Bracket - Install
1.
Install the PCM (A) with the bracket (B).

5. Harness Clamp - Install
1.
Install the harness clamps (A).