DTC Troubleshooting: B1229 (07)
DTC B1229 or DTC indicator 07: An Open in the Sunlight Sensor Circuit
DTC Description
DTC
B1229 An open in the sunlight sensor circuit
  

1.
Problem verification:

Problem verification
?1.
Clear the DTC with the HDS.


?2.
Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

?3.
Do the Self-Diagnostic Function with the HDS or the climate control unit.

?4.
Check for DTCs.
DTC Description
DTC
B1229 An open in the sunlight sensor circuit
  

Is DTC B1229 or 07 indicated?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
Intermittent failure. Check for loose wires or poor connections on the sunlight sensor circuit.?
2.
Open wire check (TSUN line):

Open wire check (TSUN line):
?1.
Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

?2.
Disconnect the following connectors.

?3.
Check for continuity between test points 1 and 2.
Without automatic lighting
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Sunlight sensor 2P connector: disconnected
Test circuit
TSUN
Test point 1
Climate control unit 32P connector No. 25 (PUR)
Test point 2
Sunlight sensor 2P connector No. 2 (PUR)

With automatic lighting
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Sunlight sensor 7P connector: disconnected
Test circuit
TSUN
Test point 1
Climate control unit 32P connector No. 25 (PUR)
Test point 2
Sunlight sensor 7P connector No. 2 (PUR)


Is there continuity?

     
YES
     
     
     
The TSUN wire is not opened. Go to step 3.
     
NO
     
     
     
Repair an open in the wire between the climate control unit and the sunlight sensor.?
3.
Open wire check (SENSOR COM line):

Open wire check (SENSOR COM line):
?1.
Check for continuity between test points 1 and 2.
Without automatic lighting
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Sunlight sensor 2P connector: disconnected
Test circuit
SENSOR COM
Test point 1
Climate control unit 32P connector No. 22 (BLU)
Test point 2
Sunlight sensor 2P connector No. 1 (BLU)

With automatic lighting
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Sunlight sensor 7P connector: disconnected
Test circuit
SENSOR COM
Test point 1
Climate control unit 32P connector No. 22 (BLU)
Test point 2
Sunlight sensor 7P connector No. 3 (BLU)


-Is there continuity?

     
YES
     
     
     
The SENSOR COM wire is OK. Go to step 4.
     
NO
     
     
     
Repair an open in the wire between the climate control unit and the sunlight sensor.?
4.
Shorted wire check (TSUN line to S 5V/S5V line):

Shorted wire check (TSUN line to S 5V/S5V line)
?1.
Check for continuity between test points 1 and 2.
Test condition
IG LOCK (0) or OFF mode
Climate control unit 32P connector: disconnected
Sunlight sensor 2P or 7P connector: disconnected
Test circuit
TSUN, S 5V
Test point 1
Climate control unit 32P connector No. 24 (BLK)
Test point 2
Climate control unit 32P connector No. 25 (PUR)


Is there continuity?

     
YES
     
     
     
Repair a short in the wires between the climate control unit and the sunlight sensor.?
     
NO
     
     
     
The TSUN wire and S 5V/S5V wire are OK. Go to step 5.
5.
Sunlight sensor check:

Sunlight sensor check
?1.
Reconnect climate control unit 32P connector.

?2.
Test the sunlight sensor.

Is the sunlight sensor OK?

     
YES
     
     
     
     
NO