|
1 |
Not used |
??? |
??? |
|
2 |
IG2 A/C |
IG2 power source |
With vehicle in ON mode: battery voltage |
|
3 |
BLOWER V |
Feedback signal of power transistor drain voltage |
With vehicle in ON mode: about 0 V?battery voltage (depending on blower motor speed) |
|
4 |
BLOWER G |
Outputs power transistor gate voltage |
With vehicle in ON mode and fan control icon OFF: less than 0.2 V
With vehicle in ON mode and fan control icon ON: about 4.0 V?battery voltage (depending on blower motor control) |
|
5 |
Not used |
??? |
??? |
|
6 |
RR DEF RLY CL- |
Signal for rear window defogger relay |
With vehicle in ON mode and rear window defogger/mirror defogger icon ON: about 0 V
With vehicle in ON mode and rear window defogger/mirror defogger icon OFF: battery voltage |
|
7 |
Not used |
??? |
??? |
|
8 |
Not used |
??? |
??? |
|
9 |
Not used |
??? |
??? |
|
10 |
Not used |
??? |
??? |
|
11 |
MODE MTR VENT |
Outputs to drive mode control motor to VENT side |
With vehicle in ON mode and mode control motor moving to VENT: battery voltage |
|
12 |
MODE MTR DEF |
Outputs to drive mode control motor to DEF side |
With vehicle in ON mode and mode control motor moving to DEF: battery voltage |
|
13 |
M-COOL |
Output to drive air mix control motor to COOL side |
With vehicle in ON mode and air mix control motor moving to COOL: battery voltage |
|
14 |
M-HOT |
Output to drive air mix control motor to HOT side |
With vehicle in ON mode and air mix control motor moving to HOT: battery voltage |
|
15 |
F/R MTR(FRESH) |
Output to drive recirculation control motor to FRESH side |
With vehicle in ON mode and recirculation control motor moving to FRESH: battery voltage |
|
16 |
Not used |
??? |
??? |
|
17 |
GND |
Ground for climate control unit (G403) |
With vehicle in ON mode: less than 0.2 V |
|
18 |
TEVA |
Detects evaporator temperature sensor signal |
With vehicle in ON mode: about 1.0?4.0 V (depending on evaporator temperature) |
|
19 |
B-CAN_H |
B-CAN communication signal |
With vehicle in ON mode: pulses |
|
20 |
TAM |
Detects outside air temperature sensor signal |
With vehicle in ON mode: about 1.0?4.0 V (depending on outside air temperature) |
|
21 |
B-CAN_L |
B-CAN communication signal |
With vehicle in ON mode: pulses |
|
22 |
TSUN |
Detects sunlight sensor signal |
With vehicle in ON mode, and no sunlight or the sensor covered up: 3.56 V
With vehicle in ON mode, and sunlight on the sensor: less than 3.56 V |
|
23 |
Not used |
??? |
??? |
|
24 |
S 5V |
Outputs sensor 5 V |
With vehicle in ON mode: about 5.0 V |
|
25 |
HUM DATA |
Humidity/in-car temperature sensor communication signal |
With vehicle in ON mode: pulses |
|
26 |
HUM CLK |
Humidity/in-car temperature sensor communication signal |
With vehicle in ON mode: pulses |
|
27 |
MDD-P |
Detects potentiometer signal of mode control motor (door position) |
With vehicle in ON mode: about 1.0?4.0 V (depending on mode control motor position) |
|
28 |
AMD-P |
Detects potentiometer signal of air mix control motor (door position) |
With vehicle in ON mode: about 1.0?4.0 V (depending on air mix control motor position) |
|
29 |
RFD-P |
Detects potentiometer signal of recirculation control motor (door position) |
With vehicle in ON mode: about 1.0?4.0 V (depending on recirculation control motor position |
|
30 |
SENSOR COM |
Sensor ground |
With vehicle in ON mode: less than 0.2 V |
|
31 |
Not used |
??? |
??? |
|
32 |
F/R MTR(REC) |
Output to drive recirculation control motor to RECIRCULATE side |
With vehicle in ON mode and recirculation control motor moving to RECIRCULATE: battery voltage |
