Audio System DTC Troubleshooting: 2610
DTC 2610: DRAM Diag
NOTE:
Check the vehicle 12 volt battery condition first.
This audio DTC sets when a problem with the internal DRAM is detected (the DA Unit icon is red in the System Links).
Before you troubleshoot, make sure to follow the General Troubleshooting Information.
1.
Problem verification:

Problem verification
?1.
Clear the hard error codes.

?2.
Turn the vehicle to the OFF (LOCK) mode then the ON mode.

?3.
Check for hard error codes.

Is DTC 2610 indicated?

     
YES
     
     
     
     
NO
     
     
     
Intermittent failure, the system is OK at this time.?