Alternator Performance Test
Alternator Performance Test
Special Tools Required
Honda 12 Volt Battery Diagnostic Station (GR8): Model Number MTRGR81100P*
*: Available through the Honda Tool and Equipment Program 888-424-6857
1.
PGM-FI system DTC check:

PGM-FI system DTC check
?1.
Connect the HDS to the DLC.

?2.
Turn the vehicle to the ON mode.

?3.
Make sure the HDS communicates with the vehicle. If it does not communicate, go to the DLC circuit troubleshooting.

?4.
Check for PGM-FI system DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
       

Are any DTCs indicated?

     
YES
     
     
     
Go to the indicated DTC's troubleshooting.?
     
NO
     
     
     
Go to step 2.
2.
Alternator Test:

Alternator Test
?1.
Jump the SCS line with the HDS.


?2.
Test the alternator with the honda 12 volt battery diagnostic station (GR8).
NOTE: For setup, customization, and other available features, refer to the GR8 user's manual.

Is the result OK?

     
YES
     
     
     
Intermittent failure, the system is OK at this time.?
     
NO