|
Audio System Symptom Troubleshooting - Audio unit button illumination does not work
Audio unit button illumination does not work
NOTE:
|
|
|
|
|
Check the connectors for poor connections or loose terminals. |
|
1. |
Problem verification:
Problem verification
|
?1. |
Turn the vehicle to the ON mode. |
|
?2. |
Turn the combination lighting switch to the parking light (  ) position. |
|
?3. |
Check the illumination of the audio unit buttons. | |
Are the buttons illuminated?
|
|
|
Intermittent failure, the audio unit is OK at this time.? |
|
|
|
The failure is duplicated, go to step 2. |
|
2. |
Determine possible failure area (interior lights circuit, others):
Determine possible failure area (interior lights circuit, others)
|
?1. |
Check the illumination of several other buttons not related to the audio system. | |
Are the buttons illuminated?
|
|
|
|
|
|
|
Troubleshoot the interior lights.? |
|
3. |
Open wire check (ILLUMI+ line):
Open wire check (ILLUMI+ line)
|
?1. |
Turn the combination light switch off. |
|
?2. |
Turn the vehicle to the OFF (LOCK) mode. |
|
?3. |
Disconnect the following connector.
NOTE: Eject the disc before disconnecting the audio unit to prevent damaging the CD player's load mechanism.
|
Audio unit connector A (24P) | |
| |
|
?4. |
Turn the combination lighting switch to the parking light position. |
|
?5. |
Measure the voltage between test points 1 and 2.
|
Test condition |
Vehicle ON mode |
| |
Audio unit connector A (24P): disconnected |
|
Test point 1 |
|
|
Test point 2 |
Body ground | |
| | |
Is there battery voltage?
|
|
|
|
|
|
|
Repair an open in the wire between the audio unit and the combination light switch.? | | 