Audio System DTC Troubleshooting: 2702

DTC 2702: GPS Diag: Receiver in Navi ECU

NOTE:

	Check the vehicle 12 volt battery condition first.
	This audio DTC sets when a problem is detected in the internal GPS receiver.
	Before you troubleshoot, make sure to follow the General Troubleshooting Information.

Problem verification:

Problem verification

?1.	Clear the hard error codes.

?2.	Turn the vehicle to the OFF (LOCK) mode then the ON mode.

?3.	Check for hard error codes.

Is DTC 2702 indicated?

Intermittent failure, the system is OK at this time.?