Audio-Navigation System DTC Troubleshooting: 1402

DTC 1402: Audio Error2 (CD Error)

NOTE:

	Check the vehicle 12 volt battery condition first.
	This navigation DTC sets when there is a problem with the built-in CD player, or an unplayable disc is inserted.
	Before you troubleshoot, make sure to follow the General Troubleshooting Information.
	Check any official Honda service website for more service information about the navigation system.

Problem verification:

Problem verification

?1.	Check that the temperature is below 158 °F (70 °C) in the dash.

?2.	Clear the hard error codes.

?3.	Turn the vehicle to the OFF (LOCK) mode then the ON mode.

?4.	Insert a disc into the audio-navigation unit, and play the disc, then eject the disc.

?5.	Check for hard error codes.

Is DTC 1402 indicated?

The failure is duplicated, go to step 2.

Intermittent failure, the system is OK at this time.?

Audio disc check:

Audio disc check

?1.	Clear the hard error codes.

?2.	Turn the vehicle to the OFF (LOCK) mode then the ON mode.

?3.	Insert a known-good disc into the audio-navigation unit, and play the disc, then eject the disc.

?4.	Turn the vehicle to the OFF (LOCK) mode then the ON mode, and wait at least 1 minute.

?5.	Check for hard error codes.

Is DTC 1402 indicated?

Original disc is faulty.?