Audio-Navigation System DTC Troubleshooting: 1002

DTC 1002: SD Read Error

NOTE:

	Check the vehicle 12 volt battery condition first.
	This navigation DTC sets when there is a problem with the SD card.
	Before you troubleshoot, make sure to follow the General Troubleshooting Information.

Problem verification:

Problem verification

?1.	Clear the hard error codes.

?2.	Turn the vehicle to the OFF (LOCK) mode then the ON mode.

?3.	Check for hard error codes.

Is DTC 1002 indicated?

Intermittent failure, the system is OK at this time.?