DTC Troubleshooting: B1036
DTC B1036: IG1 power supply circuit malfunction
DTC Description
DTC
B1036 IG1 power supply circuit malfunction
  

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTCs with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

?4.
Wait for at least 6 seconds.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
B1036 IG1 power supply circuit malfunction
  

Is DTC B1036 indicated?

     
YES
     
     
     
Repair an open or high resistance in the IG1 METER wire.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?