A/T gear position indicator does not indicate the same position as the shift lever (CVT)

A/T gear position indicator does not indicate the same position as the shift lever

Probable cause(s)

	F-CAN communication line error
	Gauge control module defective
	Transmission range switch defective or out of adjustment
	Shift cable broken or out of adjustment
	PCM defective

Notes

	Check the F-CAN communication line.
	Check the F-CAN communication line by using the gauge control module self-diagnostic function.
	Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.
	Inspect the transmission range switch.
	Check for a loose shift cable at the shift lever and the transmission control lever.